Brake Chamber & Wear Sensor History
The Brake Chamber & Wear Sensor History report returns a history of all the brake chamber and wear sensor events for the date range, including the brake chamber sensor state and pressure readings in PSI. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor event was reported) |
| Date/Time | The date and time of the sensor event |
| Brake Chamber Sensor State | The state of the brake chamber sensor, such as Engaged or Released |
| Service Brake Chamber Pressure Reading (Front Left) psi | The pressure reading in PSI for the front left service brake chamber |
| Service Brake Chamber Pressure Reading (Front Right) psi | The pressure reading in PSI for the front right service brake chamber |
| Service Brake Chamber Pressure Reading (Rear Left) psi | The pressure reading in PSI for the rear left service brake chamber |
| Service Brake Chamber Pressure Reading (Rear Right) psi | The pressure reading in PSI for the rear right service brake chamber |
| Parking Brake Chamber Pressure Reading (Front Left) psi | The pressure reading in PSI for the front left parking brake chamber |
| Parking Brake Chamber Pressure Reading (Front Right) psi | The pressure reading in PSI for the front right parking brake chamber |
| Parking Brake Chamber Pressure Reading (Rear Left) psi | The pressure reading in PSI for the rear left parking brake chamber |
| Parking Brake Chamber Pressure Reading (Rear Right) psi | The pressure reading in PSI for the rear right parking brake chamber |
| Rear Right Wear Sensor % | The percentage of wear for the rear right brake chamber |
| Front Left Wear Sensor % | The percentage of wear for the front left brake chamber |
| Front Right Wear Sensor % | The percentage of wear for the front right brake chamber |
| Rear Left Wear Sensor % | The percentage of wear for the rear left brake chamber |
| Location | The address of the asset when the sensor event was reported |
| Sensor Last Reported | The date and time when the sensor last sent an event to iOn |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Cargo Sensor History
The Cargo Sensor History report provides historical cargo sensor data on a day-to-day basis that is updated when assets send sensor status changes. Here are the columns that are displayed by default:
| Column Heading | Description |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor reading was reported) |
| Date/Time | The date and time of the sensor reading |
| Cargo Sensor Status | The state of the cargo hold, such as Empty or Cargo |
| Loaded Cargo Capacity (%) | The percentage of cargo capacity that is currently filled (from 0 to 100) |
| Location | The address of the asset when the sensor reading was reported |
| Group | The name of the group |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Detention Summary
The Detention Summary report was designed for the purpose of detention billing, which is the fee that a location owner may charge a trailer owner for leaving a trailer at their site longer than originally agreed upon. It tracks how long trailers remain at a particular location (added to your account as a geofence) — specifically, it lists your geofences, the number of assets that were within them during the time frame, and their average time per visit. Here are the columns that are displayed by default:
| Column Heading | Description |
| Account Name | The name of the group |
| Geofence | The name of the geofence |
| Assets in Geofence | The number of assets that were in the geofence during the chosen date range |
| Number of Visits | The total number of times the assets were present in the geofence in the time frame |
| Avg. Time per Visit (Hrs) | The average amount of time spent in the geofence per visit |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Door Sensor History
The Door Sensor History report lists a history of all door open and door close events for the date range. Here are the columns that are displayed by default:
| Column Heading | Description |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor reading was reported) |
| Date/Time | The date and time of the sensor reading |
| Door Sensor Status | The door state, such as Open or Close |
| Location | The address of the asset when the sensor reading was reported |
| Group | The name of the group |
| Sensor Last Reported | The date and time when the sensor last reported to iOn |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Generic Sensor History
The Generic Sensor History report returns data from a third-party generic sensor — for example, if you have a wired temperature probe attached to an iOn device, you will be able to retrieve the probe data from inside a trailer. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset Name | The name of the asset |
| Device ESN | The device’s electronic serial number |
| Event Time | The date and time of the sensor event |
| Event | The last event label reported to iOn for the sensor, such as TOWING_START for a Start Towing event |
| Location | The address of the asset when the sensor event was reported |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor event was reported) |
| Sensor Type | The type of sensor, such as Temperature |
| Sensor Value | The value reported by the sensor, such as 32 |
| Sensor Units | The unit of measurement the sensor is using for the reported value, such as F for Fahrenheit degrees |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Light Out Detection Sensor History
The Light Out Detection Sensor History report lists a history of all the light out detection sensor events for the date range, including the light out detection sensor status and light out detection sensor circuit. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group | The name of the group |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor event was reported) |
| Date/Time | The date and time of the sensor event |
| Light Out Detection Sensor Status | Which light is being reported on, such as TailLampCircuitStatus for a tail light |
| Light Out Detection Sensor Circuit | The report on the light's circuit, such as GOOD or HIGH_CURRENT |
| Location | The address of the asset when the sensor event was reported |
| Sensor Last Reported | The date and time when the sensor last sent an event to iOn |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Tire Sensor Summary
The Tire Sensor Summary report lists the pressure status for your tires that have sensors, plus the hub temperatures. At the top are a donut chart showing the number of assets with tire pressure in each status, a histogram that shows a threshold line and assets' tire position pressure in relation to that, and a grid that lists low/high tire pressure assets. The Tire Sensor Report table below these widgets shows these columns by default:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Date/Time | The date and time of the sensor event |
| Pressure Status | The tire pressure state, such as Normal or Low |
| Location | The address of the asset when the sensor event was reported |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor event was reported) |
| Left Front Inner Pressure | The pressure reading in PSI for the left front inner tire |
| Left Front Outer Pressure | The pressure reading in PSI for the left front outer tire |
| Left Rear Inner Pressure | The pressure reading in PSI for the left rear inner tire |
| Left Rear Outer Pressure | The pressure reading in PSI for the left rear outer tire |
| Right Front Inner Pressure | The pressure reading in PSI for the right front inner tire |
| Right Front Outer Pressure | The pressure reading in PSI for the right front outer tire |
| Right Rear Inner Pressure | The pressure reading in PSI for the right rear inner tire |
| Right Rear Outer Pressure | The pressure reading in PSI for the right rear outer tire |
| Left Front Inner Temperature | The temperature value for the left front inner tire |
| Left Front Outer Temperature | The temperature value for the left front outer tire |
| Left Rear Inner Temperature | The temperature value for the left rear inner tire |
| Left Rear Outer Temperature | The temperature value for the left rear outer tire |
| Right Front Inner Temperature | The temperature value for the right front inner tire |
| Right Front Outer Temperature | The temperature value for the right front outer tire |
| Right Rear Inner Temperature | The temperature value for the right rear inner tire |
| Right Rear Outer Temperature | The temperature value for the right rear outer tire |
| Left Front Hub Temperature | The temperature value for the left front wheel hub |
| Left Rear Hub Temperature | The temperature value for the left rear wheel hub |
| Right Front Hub Temperature | The temperature value for the right front wheel hub |
| Right Rear Hub Temperature | The temperature value for the right rear wheel hub |
There are no columns to add when customizing the Tire Sensor Report table, as all the available ones are enabled by default.
Trailer Activity Summary
The Trailer Activity Summary report provides trailer activity data, including the number of days your trailers have been active during the date range. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Category | The category of the asset |
| Asset Time Zone | The time zone of the asset’s group |
| Geofence | The name of the geofence the trailer entered |
| Trailer Active Days | The number of days in the chosen time range the trailer was active (defined as traveling at least .5 miles) |
| GPS Odometer | The odometer value as calculated by GPS events |
| Total Time at Geofence | The total amount of time the asset spent in the geofence in the time frame |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Trailer Utilization Summary
The Trailer Utilization Summary report shows how many days your trailers have been idle and their locations, plus the percentage of cargo capacity that is currently filled (from 0% to 100%) and the number of days the trailer has been loaded or empty (if your trailers have cargo sensors). Here are the columns that are displayed by default:
| Column Heading | Description |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Last Report Date | The date and time when the asset last sent an event to iOn |
| Geofence | The name of the geofence the asset last reported from |
| Days Idle | The number of days since the trailer last was in motion |
| Cargo Sensor Status | The state of the cargo hold (whether it is loaded or empty) |
| Loaded Cargo Capacity | The percentage of cargo capacity that is currently filled (from 0 to 100) |
| Days Loaded | The number of days the trailer has contained cargo |
| Days Empty | The number of days the trailer has been empty |
| Location | The last known address of the trailer |
| Group Name | The name of the group |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Weight Sensor History
The Weight Sensor History report shows a history of all the weight sensor events for the time period. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group | The name of the group |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Category | The category of the asset |
| Geofence | The name of the geofence (if the asset was in a geofence when the sensor reading was reported) |
| Date/Time | The date and time of the sensor reading |
| Weight Sensor Reading | The weight value |
| Location | The address of the asset when the weight reading was reported |
| Sensor Last Reported | The date and time when the sensor last reported to iOn |
There are no columns to add when customizing the report, as all the available ones are enabled by default.