Cargo Utilization Daily Detail
The Cargo Utilization Daily Detail report provides basic usage information about your cargo-monitoring devices, including the device serial number, associated assets, moving duration, stationary duration, and distance, on a day-to-day basis. Here are the columns that are displayed by default in the table:
| Column Heading | Description |
| Group | The name of the group |
| Asset | The name of the asset |
| Device Serial Number | The numeric identifier of the reporting tag |
| Date | The date and time of the activity |
| Moving Duration | The total time the asset was detected as in motion |
| Stationary Duration | The total time the asset was not moving |
| Distance (mi) | The distance, computed using the latitude and longitude values where reported events occurred |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Gateway History
The Gateway History report presents a history of events for cargo-monitoring devices, listing where your shipments have traveled by address, any sensor breaches (temperature, shock, tilt, and light sensors), stationary duration, distance, and low battery. Here are the columns that are displayed by default in the table:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset | The name of the asset |
| Location Time | The date and time of the event |
| Device Serial Number | The numeric identifier of the reporting tag |
| Location | The address where the event took place |
| Events | The reported events, plus the asset's motion status (such as Critical Battery, MOVING) |
| Temperature | The temperature value sent |
| Light | The light value |
| Shock | The reported shock value |
| Tilt | The tilt value |
| Stationary Duration | The total time the asset was not moving |
| Distance (mi) | The distance between events, using the latitude and longitude values where they occurred |
| Battery | The battery voltage value |
You can add these columns when you customize the report:
| Column Heading | Description |
| CEP | Circular error probability — a measure of how accurate a position is in meters |
| Latitude | The latitude value of the location where the event occurred |
| Longitude | The longitude value of the location where the event occurred |
| Maps Link | A Google Maps URL you can copy and paste into another browser tab, showing the coordinates where the event occurred |
Tag History
The Tag History report provides sensor-reading details, including the name of the tag device, asset name, temperature value reported by the tag, and current humidity value. Here are the columns that are displayed by default:
Note: This report requires split tags to be set for the account, as it reads messages with the message type TAG_REPORT.
| Column Heading | Description |
| Identifier | The numeric identifier of the reporting tag |
| Date | The date and time of the event |
| Tag Device Name | The name of the tag device |
| Asset Name | The name of the asset associated with the tag |
| Temperature | The temperature value detected by the tag |
| Humidity % | The reported humidity percentage value |
| Reporting Gateway | The gateway connected to the tag |
| Address | The location of the event |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Temperature Log History
The Temperature Log History report provides temperature log information from cargo-monitoring devices in both a graph and grid, including the device ID, date and time, temperature, and humidity. Here are the columns that are displayed by default in the table:
| Column Heading | Description |
| Group Name | The name of the group |
| Asset Name | The name of the asset |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Type | The type of asset, such as Tool or Equipment |
| Asset Category | The category of the asset |
| Date and Time | The date and time of the event |
| Temperature | The temperature value sent |
| Units | The units used for the temperature value, such as °F |
| Name | The name of the reporting tag |
| Identifier | The numeric identifier of the reporting tag |
| Humidity % | The reported humidity percentage value |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
CrashBoxx Event Summary
The CrashBoxx Event Summary report displays up to 60 days' worth of crash event data in two grids (for customers with the CrashBoxx AI module). The Summary of Crash Events table shows the number of events for the chosen time frame of each different CrashBoxx classification (Loose Install, Confirmed, Testing, and Unconfirmed) in each group with these default columns:
| Column Heading | Description |
| Account Name | The name of the group |
| AI Classification | Contains subcolumns for each prediction classification (Loose Install, Confirmed, Testing, and Unconfirmed), which show the number of each |
You can add two columns when you customize this table:
| Column Heading | Description |
| Device Identifier | The device's serial number |
| Date | The date of the activity |
The second grid, CrashBoxx Events, shows the severity of each crash event, where it occurred, and device identifiers, plus the classification, in these default columns:
| Column Heading | Description |
| Account Name | The name of the group |
| Device Identifier | The device's serial number |
| Device Name | The device's name |
| Location Time | The date and time of the event |
| Severity Type | The level of severity of the event, such as Non Crash |
| AI Classification | The prediction classification (Loose Install, Confirmed, Testing, or Unconfirmed) |
| Latitude | The latitude value of the location where the event occurred |
| Longitude | The longitude value of the location where the event occurred |
You can add one column when you customize this grid:
| Column Heading | Description |
| Speed | The speed the asset was traveling at the time of the event |