Cirus Spreader Summary
The Cirus Spreader Summary report tracks Cirus spreader activity and usage, including the distances the plow was engaged and the dry material traveled and the amount of granular, prewet, and anti-ice material dispensed. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Name | The name of the asset |
| Status Time | The date and time of the event |
| Plow Distance | The distance driven while the plow was engaged |
| Dry Distance | The distance driven while the dry material was dispensed |
| Vehicle Distance | The total distance traveled |
| Granular | The amount of granular material dispensed |
| Pre Wet | The amount of prewet material dispensed |
| Anti Ice | The amount of anti-ice material dispensed |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
DJ Spreader Summary
The DJ Spreader Summary report provides DICKEY-john spreader activity and usage data, including the master switch status, ground speed, air and road temperatures, tank level, granular target and actual application rate, and liquid target and actual application rate. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Name | The name of the asset |
| Date Time | The date and time of the event |
| Master Switch Status | The effective status of the master switch (Off/Auto/Unload/Unknown) |
| Ground Speed | The reported speed of the asset (in mph or kph) |
| Air Temp | The current air temperature detected (in °F or °C) |
| Road Temp | The current road temperature (in °F or °C) |
| Tank Level (%) | The current tank level value |
| Gate Height | The gate height value (in inches or centimeters) |
| Granular Target Rate | The target application rate for granular material (in pounds/foot-pound) |
| Granular Actual Rate | The instantaneous actual application rate for granular (in pounds/foot-pound) |
| Liquid Target Rate | The target application rate for liquid (in gallons/foot-pound) |
| Liquid Actual Rate | The instantaneous actual application rate for liquid (in gallons/foot-pound) |
| Vehicle Distance | The total distance traveled |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Force America Spreader Summary
The Force America Spreader Summary report provides data on Force America spreader activity and usage, including the speed, spreader status, type of granular material, granular application rate, the amount of prewet and granular material applied, and the amount of direct liquid and dust control liquid applied. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Name | The name of the asset |
| Date Time | The date and time of the event |
| Speed | The reported speed of the asset (in mph or kph) |
| Spreader Status | The state of the spreader |
| Granular Material Name | The name of the granular material used by the spreader |
| Granular Total | The total amount of granular material applied (in pounds or kilograms) |
| Granular Mode | The mode in which the spreader is monitoring the granular output |
| Spinner Rate | The spinning rate of the vehicle |
These are the columns you can add when you customize the report:
| Column Heading | Description |
| Granular Set Rate | The granular material application rate (in pounds per mile or kilograms per kilometer) |
| Granular Spread Rate Index | The granular set rate in terms of the index from 0 to 10 |
| Prewet Total | The total amount of prewet material applied (in gallons or liters) |
| Direct Total | The total amount of direct liquid applied (in gallons or liters) |
| Dust Total | The total amount of dust control liquid applied (in gallons or liters) |
| Road Temperature | The road temperature reading (in °F or °C) |
| Air Temperature | The air temperature reading (in °F or °C) |
| Temperature Received Time | The time the temperature value was reported |
Surface Temperature Summary
The Surface Temperature Summary report provides surface temperature data where spreaders and de-icers are in use, location, and speed. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Name | The name of the asset |
| Time | The date and time of the reading |
| Surface Temp | The surface temperature reading (in °F or °C) |
| Ambient Temp | The ambient temperature reading (in °F or °C) |
| Location | The location of the asset when the reading was reported |
| Speed | The reported speed of the asset at the time of the reading (in mph or kph) |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Vulcan Scale Summary
The Vulcan Scale Summary report provides truck scale information, including the number of channels, the scale weight, relay thresholds, and location. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Name | The name of the asset |
| Date/Time | The date and time of the reading |
| Channels | The number of channels |
| Scale Weights A | The scale weight for the asset's channel A (in pounds or kilograms) |
| Scale Weights B | The scale weight for the asset's channel B (in pounds or kilograms) |
| Scale Weights C | The scale weight for the asset's channel C (in pounds or kilograms) |
| Scale Weights D | The scale weight for the asset's channel D (in pounds or kilograms) |
| Relay 1 | The weight threshold that triggers relay 1 |
| Relay 2 | The weight threshold that triggers relay 2 |
| Location | The most recent address reported for the asset in the chosen date range |
There are no columns to add when customizing the report, as all the available ones are enabled by default.