Asset History
The Asset History report provides a list of your assets' recent events, including when and where they occurred, the speed the assets were traveling, engine hours, and odometer values. Here are the columns that are displayed by default:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Category | The category of the asset |
| Event Time | The date and time of the event |
| Event Type | The PEG name of the event, such as IGON for Ignition On |
| Event | The name of the event, such as Ignition On or Hard Deceleration |
| Travel Status | The state of the asset's travel at the time the event was reported, such as Idle or Moving |
| Latitude | The latitude value of the location where the event occurred |
| Longitude | The longitude value of the location where the event occurred |
| Address | The location address detected when the event occurred |
| Geofence | The geofence reported for the event, if any |
| Speed | The asset's speed at the time of the event |
| Posted Speed Limit | The speed limit posted at the event's location |
| Over Limit | How far over the posted speed limit the asset was traveling (the difference between the preceding two columns), if it was speeding |
| Heading | The cardinal or ordinal direction the asset was traveling, such as SW for southwest |
| Engine Hours Meter | The ending engine hours meter value received at the time of the event |
| Odometer | The most recent odometer reading received at the time of the event |
| Operator Alias | The driver's alias, if any |
| Operator | The driver's name, as entered in iOn |
| Route | The name of the route, if your organization is using routes as another level of filtering |
| Time Zone | The time zone of the group where the event occurred |
These are the columns you can add when you customize the report:
| Column Heading | Description |
| Engine RPM | The vehicle bus engine speed; higher revolutions-per-minute values mean higher output power and fuel consumption |
| Maps Link | A Google Maps URL you can copy and paste into another browser tab, showing the coordinates of the event's location |
| ESN | The electronic serial number of the asset's LMU |
| VIN | The vehicle identification number, for vehicle assets |
Input Usage Detail
The Input Usage Detail report provides day-to-day details of input use, with each input event in a single row, including the input name, asset, driver, when the input was turned on and off, and the duration and location of its use (address, latitude/longitude, and if applicable, geofence). Here are the columns that are displayed by default in the report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Date | The date being reported on |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| Operator First Name | The driver's first name, as entered in iOn |
| Operator Last Name | The driver's last name, as entered in iOn |
| Operator Type | The driver's type, if entered in iOn |
| Operator Category | The driver's category (if your organization has delineated driver categories and entered them in iOn) |
| Input Name | The name of the input |
| Input Active Time | The time of day the input became active for this event |
| Input Inactive Time | The time of day the input was deactivated for this event |
| Input Active Duration | The total time of the input's activity for this instance — the input inactive time minus the input active time |
| Input Inactive Duration | The total time the input was inactive |
| Input Active Travel Distance | The distance driven while the input was active for this event, based on odometer readings reported to iOn |
| Input Inactive Travel Distance | The distance driven while the input was inactive for this event, based on odometer readings reported to iOn |
| Input Active Location | The location detected when the input became active for this event |
| Input Inactive Location | The location detected when the input was deactivated for this event |
| Input Active Latitude | The latitude value of the location where the input became active for this event |
| Input Active Longitude | The longitude value of the location where the input was turned on |
| Input Inactive Latitude | The latitude value of the location where the input was deactivated |
| Input Inactive Longitude | The longitude value of the location where the input was turned off |
| Input Active Geofence | The geofence location detected when the input was activated for the event, if any |
| Input Inactive Geofence | The geofence detected when the input was deactivated, if any |
| Odometer | The odometer reading received at the activation time of the input event |
There are no columns to add when customizing the Input Usage Detail report, as all the available ones are enabled by default.
Input Usage Summary
The Input Usage Summary report provides aggregated input use data, including the input name, asset, driver, total number of active days over the date range, average number of hours per day the input was turned on and off, average duration of its use, and distance traveled while in use. Here are the columns that are displayed by default in the report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| Operator First Name | The driver's first name, as entered in iOn |
| Operator Last Name | The driver's last name, as entered in iOn |
| Operator Type | The driver's type, if entered in iOn |
| Operator Category | The driver's category (if your organization has delineated driver categories and entered them in iOn) |
| Input Name | The name of the input |
| Active Days | The number of days the asset was active during the time range (when an Ignition event was sent to iOn and the asset traveled over 0.5 miles) |
| Avg. First Input Active (Hrs) | The average hours of the first time the input was enabled |
| Avg. First Input Inactive (Hrs) | The average hours of the first time the input was disabled |
| Avg. Last Input Active (Hrs) | The average hours of the last time the input was enabled |
| Avg. Last Input Inactive (Hrs) | The average hours of the last time the input was disabled |
| Total Input Active Duration (Hrs) | The total time the input was active over the course of the time range |
| Total Input Inactive Duration (Hrs) | The total time the input was inactive across the date range |
| Avg. Input Active Duration (Hrs) | The average amount of the time the input was enabled |
| Avg. Input Inactive Duration (Hrs) | The average amount of the time the input was disabled |
| Input Active Travel Distance | The distance driven while the input was active across all the chosen days, based on odometer readings reported to iOn |
| Input Inactive Travel Distance | The distance driven while the input was inactive during the time period, based on odometer readings reported to iOn |
| Avg. Input Active Travel Distance | The average distance driven when the input was active |
| Avg. Input Inactive Travel Distance | The average distance driven while the input was inactive |
| % of Input Active Duration | The percentage of the time the input was enabled — the total active duration divided by the combined total active and inactive duration |
| % of Input Active Distance | The percentage of the distance traveled that the input was turned on — the total active distance divided by the combined total active and inactive distance |
There are no columns to add when customizing the Input Usage Summary report, as all the available ones are enabled by default.
Location Activity Asset List
The Location Activity Asset List report provides a list of assets and drivers that traveled through the area surrounding a specified address. Here are the columns that are displayed by default in the report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| Operator First Name | The driver's first name, as entered in iOn |
| Operator Last Name | The driver's last name, as entered in iOn |
There are no columns to add when customizing the report, as all the available ones are enabled by default.
Location Activity Event Details
The Location Activity Event Details report provides a list of events that occurred in the area surrounding a specified address, including asset names, drivers, stop duration, odometer values, and latitude and longitude where each event occurred. Here are the columns that are displayed by default in the report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| Operator First Name | The driver's first name, as entered in iOn |
| Operator Last Name | The driver's last name, as entered in iOn |
| Event Time | The date and time of the event |
| Event Type | The PEG name of the event, such as IGON for Ignition On |
| Heading | The cardinal or ordinal direction the asset was traveling, such as SW for southwest |
| Stop Duration | The time taken for this event's stop, if any (a stop is designated as a work or trip stop if the idling is over five minutes) |
| Odometer | The most recent odometer reading received at the time of the event |
| Latitude | The latitude value of the location where the event occurred |
| Longitude | The longitude value of the location where the event occurred |
| Address | The location address detected when the event occurred |
You can add one column when you customize the report:
| Column Heading | Description |
| Maps Link | A Google Maps URL you can copy and paste into another browser tab, showing the coordinates where the event occurred |
Trip Detail
The Trip Detail report provides detailed information about the trips your assets and drivers have driven, including trip start/end location, start/end time, distance, and total duration. A trip is started for a vehicle when iOn receives the Start message while its ignition is on, and the trip ends when the asset idles for over five minutes or when iOn receives an Ignition Off event from its device. Here are the columns that are displayed by default in the Trip Detail report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| First Name | The driver's first name, as entered in iOn |
| Last Name | The driver's last name, as entered in iOn |
| Operator Type | The driver's type, if entered in iOn |
| Operator Category | The driver's category (if your organization has delineated driver categories and entered them in iOn) |
| Trip Start Location | The location detected when iOn received the Start event |
| Starting Location Geofence | The geofence location detected when iOn received the Start event, if any |
| Starting Geofence Category | The category of the geofence the trip was started in, if any |
| Trip Start Date Time | The date and time when the start of the trip was detected |
| Trip End Location | The location detected when the trip ended (when the Ignition Off event was sent or the asset had been idling for five minutes) |
| Destination Geofence | The geofence detected when the trip ended, if any |
| Destination Geofence Category | The category of the geofence the trip ended in, if any |
| Trip Arrival Date Time | The date and time when the end of the trip was detected |
| Time Zone | The time zone of the group where the trip occurred |
| Distance | The distance driven for the trip, based on odometer readings reported to iOn |
| Time at Destination | The time spent at the destination before the next trip started; if the last trip of the day spans two days, this is calculated as 11:59:59 p.m. minus the trip arrival time |
| Trip Travel Time | The total travel time for the trip — the trip arrival time minus the trip start time |
| Trip Total Time | The total trip time — the trip travel time plus the time at the destination |
| Trip Idle Time | The idle time within the trip |
| Input [1-7] Name | The name of the input connected to input port [1-7] that was active during the trip |
| Input [1-7] Start Time | The time of day input [1-7] first became active during the trip |
| Input [1-7] End Time | The time of day input [1-7] finished its activity (became inactive) during the trip |
| Total Input [1-7] Active Duration | The total time input [1-7] was active — the input end time minus the input start time |
| Total Input Active Duration | The total time all the inputs were active |
| Trip Start Latitude | The latitude value of the location where the trip started |
| Trip Start Longitude | The longitude value of the location where the trip started |
| Trip End Latitude | The latitude value of the location where the trip ended |
| Trip End Longitude | The longitude value of the location where the trip ended |
| Badge/Fob ID | The driver's keyfob ID number, if one was detected for the trip |
These are the columns you can add when you customize the report:
| Column Heading | Description |
| Original Trip Start Location | The original location detected when iOn received the Start event Note: The values in this column may be slightly different from the ones in Trip Start Location due to GPS drift; it's better to just use the Trip Start Location column. |
| Start Date | The date when the start of the trip was detected |
| Start Time | The time of day when the start of the trip was detected |
| Arrival Date | The date when the end of the trip was detected |
| Arrival Time | The time of day when the end of the trip was detected |
| Original Trip Start Latitude | The latitude value of the location where the trip started Note: The values in this column may be slightly different from the ones in Trip Start Latitude due to GPS drift; it's better to just use the Trip Start Latitude column. |
| Original Trip Start Longitude | The longitude value of the location where the trip started Note: The values in this column may be slightly different from the ones in Trip Start Longitude due to GPS drift; it's better to just use the Trip Start Longitude column. |
| Start Location Maps Link | A Google Maps URL you can copy and paste into another browser tab, showing the coordinates of the location where the trip began |
| End Location Maps Link | A Google Maps URL you can copy and paste into another browser tab, showing the coordinates of the location where the trip ended |
Trip Summary
The Trip Summary report provides aggregated trip data over the time range, including the number of trips each asset took, number of geofence trips, travel time, distance, time spent at the destinations, and idle time. A trip is started for a vehicle when iOn receives the Start message while its ignition is on, and the trip ends when the asset idles for over five minutes or when iOn receives an Ignition Off event from its device. Here are the columns that are displayed by default in the Trip Summary report:
| Column Heading | Description |
| Group Name | The name of the group/account |
| Asset Alias | The asset’s alias (if your organization uses aliases and has entered them) |
| Asset Name | The name of the asset |
| Asset Type | The type of asset, such as Vehicle or Trailer |
| Asset Category | The category of the asset |
| Operator Alias | The driver's alias, if any |
| First Name | The driver's first name, as entered in iOn |
| Last Name | The driver's last name, as entered in iOn |
| Operator Type | The driver's type, if entered in iOn |
| Operator Category | The driver's category (if your organization has delineated driver categories and entered them in iOn) |
| # Trips | The total number of trips detected over the time range |
| # Landmark Trips | The total number of geofences traveled through in the trips |
| Distance | The total distance driven across all the trips, based on odometer readings reported to iOn |
| Time at Destination (Hrs) | The total time spent at all the destinations for the trips |
| Trip Travel Time (Hrs) | The total travel time for the trips |
| Trip Total Time (Hrs) | The total trip time — the trip travel time plus the time at the destinations |
| Trip Idle Time (Hrs) | The total idle time within the trips |
There are no columns to add when customizing the Trip Summary report, as all the available ones are enabled by default.